BASIC MILL OPERATOR EXAM PACKAGE DEAL WITH COMPLETE SOLUTIONS.

At the most basic level, a lathe is a machine that: - Answer-Takes a cylindrical piece of raw metal stock and turns it into a finished part with accurate features The materials that a lathe might be cutting can vary from wood and plastic, all the way to aluminum or hard steel. - Answer-True Rega...

When we use the term "crash" on a machine tool, we are primarily speaking of: - Answer-The spindle colliding with another object in the machine enclosure Crashing a CNC machine results in downtime for the machine, and can be very costly to the shop owner. Every shop is concerned about crashing ...

It is important to spend time in front of an actual CNC machine to become familiar with what they do and how they operate. A good place to do this is: - Answer-Your local Haas Factory Outlet What is the most common workholding device? - Answer-A mill vise Every workpiece in a job run needs to be ...

When you leave your station at then end of your shift or for the weekend, it is important that you clean your workspace, put away your tools, and clean up any spills that may have occurred. - Answer-True When operating a CNC machine throughout the workday, there is no need to clean out the chips s...

If a dimension on a drawing is 4.868" with a tolerance of +/- .003", what is the largest the dimension can check and still be in tolerance? - 4.871" If you are standing in front of a vertical CNC machining center, what direction does the X-axis travel? - left to right A boxed dimension is def...

The number 1 cause of injury in a machine shop is: - Answer-Inattention by the Operator There are many ways to stop a machine. The next couple of questions all focus on the various ways to stop a machine. Which answer below best describes what the Reset button does? - Answer-Stops a program, and ...

Watching the Haas Certification videos is a good first step to learning the basics about CNC machines. However, there is nothing better than hands-on experience. Be sure to contact _____________ to arrange time in front of a Haas CNC machine. - Answer-Your local Haas Factory Outlet The first numb...

Many shops will power down the machines each night. The main circuit breaker will commonly be left in the ON position when the machine is powered down. Where is the main circuit breaker located on the machine? - Answer-In the door of the control cabinet at the rear of the machine When starting up...